Motors

TM 430 - Maxi

The pictures below show  the available motor types.
 

TM430-20 PRO	TM430-30
TM430-40 Triton - the muscle man for upto 2500Watts	TM430 Prop adapter with 4-hole Mounting and central M5 hole for Spinner mounting

With the TM430 Series we offer motors which address all applications  between 800 und 2500 Watts and are currently very rare on the market of direct drive motors. Two stator lengths are available as 10- and 14pole versions. The 10pole versions are intended to be used for applications which need high revs between 8000 - 16000rpm, as required in model helicopters with 20 to 32 cells. These motors (10- and 14pole) can drive props from 18 to 22 " diameter without gear.

With the outside diameter of 52mm, these motors fit without problems into most  fuselages of bigger models. If it's getting  tight anyhow, the motor can be moved 40mm to the rear with the available extension kit (see drawing below).
All motors can be supplied (or converted) for inside fuselage (behind front wall) or outside fuselage (in front of fuselage) mounting - please add a remark when ordering for rear mounting (the shaft exits to the opposite side).

The TM430-40 Triton is - like its smaller brothers, equipped with an additional thin wall bearing, which supports the long rotor at the front and provides an excellent concentricity.  In addition it an be ordered with an extra, outside mounted rear bearing to allow an additional support of the motor at the back side. This is mandatory for all dynamic applications where big torque and coriolis forces appear.

Examples for applications can be found on the main page under  "Fascination - Practical Samples".

• TM430-20 : 600 - 1000Watts, weight   ~ 375g, 14 -26 cells, 4 - 8 Lipos

  • as 14pole Version for sail planes up to 7,5Kg, Acro models up to 4Kg

  • as 10pole Version for Helicopters

• TM430-30 : 800 - 1500Watts, weight  ~500g, 16 -32 cells, 5 - 10 Lipos

  • as 14pole Version for all kind of wing models

  • as 10pole Version for Helicopters

• TM430-14 Triton : 1400 to 2000, short upto 2500Watts, weight ~670g, 20-32 cells, 8-12 Lipos

  • as 14pole Version for ll kind of wing models

  • as 10pole Version for Helicopters and other models

NEW  pdf- Spec Sheet for Download

Dimensions

Main Dimensions : A - Length K - Diameter N - Mtg. Hole Distance O - Thread Size P - Thread Depth C - Shaft Diameter

• A(*) = Shaft length can vary or can be modified
• P(*) = maximum allowed screwing depth of mounting screws

Dimension TM430 with attached Extension Kit for integration into slim fuselages :

minimum rib diameter : 42mm,  screw hole circle diameter 24 and 34mm, M4 (4x)

Dimensions TM430-40 Triton (with external Bearing)  :

• Please notice, that all Torcman motors are optimized for use as direct drive engines - gears are no longer required for use with big props.
• Application proposals, optimized combinations of battery cells and props can be found on the main page under "Configuration" .
• Motor and accessories can be ordered directly by phone or Email.
• All information without engagement - technical data are subject to modifications